Item # 3111-150 On Schaerges & Vossler Pump Co.

Unit of Measure

Specifications | Design Features

Manufacturer	N/A Crane
Pump Classification	N/A Deming Pumps
Series	N/A A
Size	N/A 1 1/2 x 1 1/4 x 4
Type	N/A 1A
Suction	N/A 1-1/2 in
Discharge	N/A 1-1/4 in
Casing Wall Thickness	N/A 1/4 in
Max. Working Pressure	N/A 100 psi
Max. Impeller Diameter	N/A 4 1/4 in
Impeller Design	N/A Enclosed
Impeller Eye Area Inches	N/A 2.1 in²
Max. Solids	N/A 9/32 in
Shaft Diameter at Coupling End	N/A 5/8 in
Shaft Diameter at Bearing	N/A 0.7875 in
Shaft Diameter at Seal	N/A 5/8 in
Shaft Diameter at Impeller	N/A 7/16 in
Bearing Size	N/A 3304
Bearing CL to Bearing CL	N/A 2 3/4 in
Bearing CL to Impeller CL	N/A 3 3/4 in
Pump Weight¹	N/A 24

N/A

Frame - Heavy duty one-piece construction. Grease lubricated. Combination bearing frame and seal housing.
Shaft assembly - One-piece stainless steel.
Liquid end - Back pull-out design allows disassembly without disturbing the suction and/or discharge piping. Two-piece construction.
Casing - Suction head and casing are one-piece casting. Tangential discharge. Rotated at 90° intervals through 360°.
Impeller - Enclosed type, hydraulically balanced for optimum performance. New design eliminates the need for wearing rings, reduces the effects of abrasive action and equalizes pressure between the suction and discharge chambers of the casing. Threaded for standard, off-the-shelf jet pump motor and the 1A bearing frame.

Manufacturer