Schaerges & Vossler Pump Company
Schaerges & Vossler Pump Company
11979 Tramway Drive / Cincinnati
Ohio 45241
Phone: 513-563-4155
Email: svpump.bob@fuse.net
Website: http://www.svpumps.com
Print Back
Crane Deming Series 3000 end-suction centrifugal pump sets the industry standard for low maintenance, high performance, and rugged reliability. The ultra-dependable industrial pump is available in seven basic frames and in a complete range of 44 sizes, from 1" to 8" discharge.

Built for continuous operation in general industrial, OEM and HVAC service, the pumps come in frame-mounted and close-coupled designs using both JM and JP standard motor shaft dimensions.

The 3000 Series features amore

PI---3000-Series-new
Unit of Measure
Items Image
3111-175 		Image
3111-125 		Image
3111-150 		Image
3111-21504 		Image
3111-1251
Manufacturer N/A
Crane
Pump Classification N/A Deming Pumps
Series N/A A
Size N/A 1 x 3/4 x 4 N/A 1 1/4 x 1 x 4 N/A 1 1/2 x 1 1/4 x 4 N/A 2 x 1 1/2 x 4 N/A 1 1/4 x 1 x 5
Type N/A 1A
Suction N/A 1 in N/A 1 1/4 in N/A 1-1/2 in N/A 2 in N/A 1 1/4 in
Discharge N/A 3/4 in N/A 1 in N/A 1-1/4 in N/A 1-1/2 in N/A 1 in
Casing Wall Thickness N/A 1/4 in
Max. Working Pressure N/A 100 psi
Max. Impeller Diameter N/A 4 1/4 in N/A 4 1/4 in N/A 4 1/4 in N/A 4 1/4 in N/A 5 in
Impeller Design N/A Enclosed
Impeller Eye Area Inches N/A 1.0 in2 N/A 1.5 in2 N/A 2.1 in2 N/A 2.8 in2 N/A 1.5 in2
Max. Solids N/A 5/32 in N/A 3/16 in N/A 9/32 in N/A 11/32 in N/A 3/16 in
Shaft Diameter at Coupling End N/A 5/8 in
Shaft Diameter at Bearing N/A 0.7875 in
Shaft Diameter at Seal N/A 5/8 in
Shaft Diameter at Impeller N/A 7/16 in
Bearing Size N/A 3304
Bearing Size (IB/OB) N/A
Bearing CL to Bearing CL N/A 2 3/4 in
Bearing CL to Impeller CL N/A 3 1/2 in N/A 3 11/16 in N/A 3 3/4 in N/A 3 3/4 in N/A 3 11/16 in
Shaft Diameter Under Sleeve N/A
Shaft Sleeve OD N/A
Pump Weight1 N/A 22 N/A 22 N/A 24 N/A 24 N/A 23
Design Features N/A

  1. Frame - Heavy duty one-piece construction. Grease lubricated. Combination bearing frame and seal housing.
  2. Shaft assembly - One-piece stainless steel.
  3. Liquid end - Back pull-out design allows disassembly without disturbing the suction and/or discharge piping. Two-piece construction.
  4. Casing - Suction head and casing are one-piece casting. Tangential discharge. Rotated at 90° intervals through 360°.
  5. Impeller - Enclosed type, hydraulically balanced for optimum performance. New design eliminates the need for wearing rings, reduces the effects of abrasive action and equalizes pressure between the suction and discharge chambers of the casing. Threaded for standard, off-the-shelf jet pump motor and the 1A bearing frame.
  • 1 Pump and Max. HP Wt.