Products

Request Information
Weinman's Split Case LVM Series pumps provide the same reliable performance as the L Series. Its vertical design occupies less space than horizontal pumps, making installation easier, especially in small or restricted areas. The improved design also makes it easier to perform routine maintenance. The pumps use three-phase motors from
1 hp (0.75 kW) through 400 hp (300 kW) that deliver heads to 450 ft (137 m) and capacities to 6000 gpm (1363 m3/h)

Unit of Measure

Manufacturer

 N/A
Weinman

Pump Classification

 N/A Split-Case Pumps

N/A

  • A separate, adjustable motor mounting plate can be doweled into place by the installer after coupling is aligned in field to ensure accurate, lasting alignment.
  • The pump is permanently bolted and doweled to the base at the factory to prevent pump movement and misalignment.
  • A spacer-type coupling is standard and allows easy replacement of seals and bearings without removing motor or casing top.
  • A thrust collar sleeve (13) prevents the rotating assembly from dropping if a bearing should fail. A lip seal (15)prevents liquid from entering the lower bearing housing.
  • Lifting holes placed in the top and side of the base make lifting and installation easier.