Products

Unit of Measure

Manufacturer

N/A
Crane

Pump Classification

N/A Deming Pumps

Series

N/A B

Size

N/A 3 x 2 1/2 x 7

Type

N/A 1B

Suction

N/A 3 in

Discharge

N/A 2-1/2 in

Casing Wall Thickness

N/A 3/8 in

Max. Impeller Diameter

N/A 7 1/4 in

Impeller Design

N/A Enclosed

Impeller Eye Area Inches

N/A 7.36 in2

Max. Solids

N/A 17/32 in

Shaft Diameter at Coupling End

N/A 7/8 in

Shaft Diameter at Impeller

N/A 7/8 in

Bearing Size (IB/OB)

N/A 3207/5306

Bearing CL to Bearing CL

N/A 4 1/4 in

Bearing CL to Impeller CL

N/A 4 3/4 in

Shaft Diameter Under Sleeve

N/A 1 in

Shaft Sleeve OD

N/A 1 1/4 in
Pump Weight1 N/A 91

N/A

  1. Frame - Heavy duty cast- iron construction. Adaptable for either grease or oil lubrication.
  2. Rotating element - Totally adjustable by use of the micrometer adjustment housing on the thrust bearing.
  3. Shaft - Heavy 4140 Steel.
  4. Shaft sleeve - Hooked style for maximum drive and 316 stain less steel for serviceability.
  5. Liquid end - Top centerline back pull-out design allows disassembly without disturbing the suction and/or discharge piping. Two- piece construction.
  6. Casing - Suction head and casing are one-piece casting. Top centerline discharge connection. Rotated at 45-degree intervals through 360 degrees. 316 stainless steel casing wearing rings are standard.
  7. Impeller - Enclosed and/or semi-enclosed types, statically and hydraulically balanced for optimum performance. Straight bore design for interchangeability on both frame and close-coupled designs.
  8. Impeller wearing rings - are optional on enclosed impellers.
  9. Adapter assembly - Combination motor/frame support and seal housing.

     

  • 1 Pump and Max. HP Wt.