Products

Unit of Measure

Manufacturer

N/A
Crane

Pump Classification

N/A Deming Pumps

Series

N/A A

Size

N/A 2 1/2 x 2 x 6

Type

N/A 2A

Suction

N/A 2-1/2 in

Discharge

N/A 2 in

Casing Wall Thickness

N/A 1/4 in

Max. Working Pressure

N/A 125 psi

Max. Impeller Diameter

N/A 6 1/2 in

Impeller Design

N/A Enclosed

Impeller Eye Area Inches

N/A 4.9 in2

Max. Solids

N/A 3/8 in

Shaft Diameter at Coupling End

N/A 7/8 in

Shaft Diameter at Bearing

N/A 1.181 in

Shaft Diameter at Seal

N/A 1.000 in

Shaft Diameter at Impeller

N/A 7/8 in

Bearing Size

N/A 3306

Bearing CL to Bearing CL

N/A 4 1/8 in

Bearing CL to Impeller CL

N/A 4 1/8 in
Pump Weight1 N/A 44

N/A

  1. Frame - Heavy duty one-piece construction. Grease lubricated. Combination bearing frame and seal housing.
  2. Shaft assembly - One-piece stainless steel.
  3. Liquid end - Back pull-out design allows disassembly without disturbing the suction and/or discharge piping. Two-piece construction.
  4. Casing - Suction head and casing are one-piece casting. Tangential discharge. Rotated at 45° intervals through 360°
  5. Impeller - Enclosed type, hydraulically balanced for optimum performance. New design eliminates the need for wearing rings, reduces the effects of abrasive action and equalizes pressure between the suction and discharge chambers of the casing. Straight bore for interchangeability on JM motor shaft or 2A frame.

  • 1 Pump and Max. HP Wt.